6.1.2
Do a check on the appliance
1.
Do a check for leaks on the gas pipes and the gas pipe connections. Refer to chapter
2.
Make sure that the pilot light operates correctly. The pilot light must not show any
anomalies.
3.
Make sure that the main burner operates correctly. The fire must not show any
anomalies.
4.
Do a check of the gas supply pressure and the burner pressure.
a) Use the inlet pressure tap and outlet pressure tap on the gas regulator block to
measure the supply pressure and the burner pressure.
b) Measure the pressure when the appliance is off and when the appliance burns
on maximum. Refer to chapter
for the required supply pressure and burner
pressure.
5.
Make sure that the ambient lighting operates correctly.
6.
Do a check on the concentric flue system and the outlet construction. Make sure that
all the connections of the concentric flue system are secure.
6.2
Maintenance procedures
6.2.1
Remove the glass pane Floating Frame (+)
Warning:
Before the start of this procedure make sure the appliance is off
and cooled down to room temperature.
Caution:
Use protective gloves.
Floating Frame / Floating Frame +
1.
Turn off the gas supply to the appliance before removing the glass pane.
2.
With the hook, pull the metal spring
strip on the top, left and right, from
the studs on the door.
Maintenance
Gas Fire Front 90-75
53
Summary of Contents for 90-75 PF2
