Barazza B90M5 Series, Instructions For Installation Manual, Page: 5 / 25

5
BURNER COVER
BURNER
INTERCHANGEABLE NOZZLE NOZZLE HOLDER
- How to use the burners and the Fry Top
Next to each knob there is a symbol that shows which burner it refers to. Each
gas burner knob has the following symbols:
Stop Maximum setting Minimum setting
The burner should be turned on before putting the pan on the rung.
To turn a burner on, press the knob right down turning it counter-clockwise to
the maximum position and then press the electric ignition button. Let go of the
knob after 5 seconds. If the burner fails to stay alight, keep the knob pressed
right down longer to give the safety valve time to warm up.
Check that the flame is regular and turn the knob to the setting required.
If ignition is difficult or the flame irregular, check the correct position of the burner
and its cover ( Fig.2 ).
Fig.2
To turn the flame out, turn the knob clockwise to the
symbol. Before
taking the pans off the rung, lower the flame or turn it out. If, when you’re using
the hob, the flame goes out accidentally the safety valve will stop the flow of
gas in about 40 seconds.