16
- Reparation electrical part
Before calling the after sales service check that:
- The plug is inserted in the socket well.
- The main switch in the house is on.
If necessary, have the appliance serviced by qualified personnel.
Remove the plug from socket before disassembling any part.
- Replacement of feed cable
The feed cable must be in HO5 RR-F, with a cross sectional area of 3x1.5 mm².
The cable can be replaced this way:
-
open the terminal board (Fig.10);
-
insert the wires to their terminals: N – L – Earth;
-
the earthing wire is the yellow green one;
-
fix the cable in its cable clamp;
-
close the terminal board by pressing lightly on the lid until it shuts;
Fig.10
N.B.: After installation the lead must be accessible.
Summary of Contents for B90M5 Series
Page 25: ...25...