18
- Adapting hob burners to other types of gases
These hob models are fitted with burners that require no air regulation. For this
reason, to adapt the appliance to work with a gas different to what it has been set
for, simply substitute the nozzles and adjust the minimum.
a) Changing the nozzles
Remove the rungs, burners and flame dividers. Using the spanner provided with
the appliance, remove the nozzles – Fig.12 and replace them with those
enclosed, strictly observing the marking and the following table.
Fig. 12
If the appliance has to be adjusted to suit a different gas source, the installer has
to fix the new labels over the old ones. Two labels are found in the guarantee and
in the back of appliance.
INTERCHANGEABLE NOZZLE
NOZZLE HOLDER
Summary of Contents for B90M5 Series
Page 25: ...25...