Baracuda
®
Adventura™ Robotic Pool Cleaner | Owner's Manual
Figure 3. Connect Metal Frame to Base Unit
4.
Slide the handnut over the tube and
twist to tighten onto base unit.
Figure 4. Twist Handnut to Secure Frame
5.
Snap two (2) support blocks into place.
6.
Slide axle and hubcap piece through
center of wheel and attach to base unit.
Snap locking clip into place to secure
wheel. Repeat to attach both wheels.
Figure 5. Snap in Support Blocks and Attach Wheels
7.
Slide the control unit base / caddy
handle attachment down over the metal
tubing until it snaps into place.
Figure 6. Attach Caddy Handle
8.
Align cleaner hook pins with the top
holes in the handle tube and snap into
place.
Figure 7.
Snap Cleaner Hook into Place
3.3 Connecting the Control Unit to the
Caddy
1.
Align the bottom of the control unit with
the notch at bottom of the control unit
hook on the caddy (Figure 8).
Figure 8. Align Control Unit with Caddy Hook
5
