Baracuda
®
Adventura™ Robotic Pool Cleaner | Owner's Manual
7.
Push and position the rib of the inner
side of the tire in the groove of the wheel
(Figure 33). If needed, turn the wheel
gently to help with installation.
Figure 33. Push the Tire into Place on the Wheel
Section 6. Troubleshooting
6.1 Using the Information LED
The information LED
on the Control box
flashes in a specific sequence to indicate one of
three possible cleaner malfunctions.
LED Flashing
Cause
Solution
1 Flash
LED flashes once
Floating cable may not be
plugged into the Control box
correctly.
Unplug the floating cable from the Control box and
reconnect.
If the problem persists, contact Baracuda Customer
Service at 1300 784 423
2 Flashes
LED flashes twice
Cleaner wheels may be jammed
or brushes may be blocked with
debris.
Turn cleaner wheels to ensure they are not jammed.
Check brushes for debris.
Start a new cleaning cycle.
If the problem persists, contact Baracuda Customer
Service at 1300 784 423.
3 Flashes
LED flashes three
Pump axis or propeller may be
jammed with debris.
Dirty filter.
Check the pump axis for debris.
Check propeller for debris.
Clean the filter.
Start a new cleaning cycle.
If the problem persists, contact Baracuda Customer
Service at 1300 784 423.
13
