Rear Brake Device Assembling
Apply grease to setting pin, brake cam and brake block friction surface.
Apply grease to moving part of brake cam.
z
Do not apply grease to parts not specified. Superfluous grease flows into brake friction
linings of brake drum shall reduce braking effect.
Mount brake cam.
Mount brake swing arm on brake cam.
z
Notch on brake swing arm should be aligned with the cut-off of brake cam.
Mount brake swing arm setting bolt and fasten it.
Torque: 10N
·
m
Mount brake block assembled with spring.
Mount rear wheel.
Mount exhaust muffler.
Mount brake swing arm pin and rear brake cable.
z
Mount return spring of brake cable with
the spring aligned with the recess hole of
left crankcase cover.
Mount adjusting nut.
Adjust brake system.
return spring
adjusting nut
rear brake cable
27
www.asiamotor.se Baotian European Spare parts Center
