Axle Bending Inspection
Place axle on a V-seat and measure with a dial
gauge.
The dial gauge indicates a 1/2 bending value.
Limit of use: Replace if
>
0.2mm.
Wheel Rim Oscillation Inspection
Measure oscillation value on a correcting bench.
Limit of use: Replace if
>
2.0mm.
Traverse direction: Replace if
>
2.0mm.
Front Wheel Bearing Inspection
Remove front wheel bearing and dust cover.
Turn bearing inner race to inspect sliding.
Replace it with a new one in case of no sliding or
damage or loosening of outer race.
Front Wheel Bearing Replacement
Dismounting: Remove front wheel bearing by
means of a bearing remover, take out spacer.
Mounting: Apply grease to the bearing.
Drive in left bearings.
18
dust cover
front axle bush
www.asiamotor.se Baotian European Spare parts Center
