Banner SSA-EB Series, Instruction Manual

Page: 11 / 12

ESLP1-30/60-NW
• E-Stop Legend, Plastic
• Blank
• 60 mm diameter (OD)
• 30 mm hole
ESLP1-30/60
• E-Stop Legend, Plastic
• "Emergency Stop”
• 60 mm diameter (OD)
• 30 mm hole
ESL-41/60 (1 each)
ESL-41/60-10 (10 each)
• E-Stop Legend, Label
• "Emergency Stop”
• 60 mm diameter (OD)
• 41 mm hole for
application around
SSA-EB1P…
ESL-41/60-ENES (1 each)
ESL-41/60-ENES-10 (10 each)
• E-Stop Legend, Label
• "Emergency Stop -
Parada de Emergencia”
• 60 mm diameter (OD)
• 41 mm hole for
application around
SSA-EB1P…
ESL-44/70 (1 each)
ESL-44/70-10 (10 each)
• E-Stop Legend, Label
• "Emergency Stop”
• 70 mm diameter (OD)
• 44 mm hole for
application around
SSA-EB1M…
EM
ER
GE
NC
Y
STO
P
EM
ERGENCY STO
P
w
w
w
.b
an
n
er
en
g
in
ee
rin
g.
co
m
ESC-1-YW
• Emergency stop cover
• 72 mm wide; 30 mm center hole
• For use on standard (non-lockable)
40mm models
U.S. Application Standards
ANSI B11.0 Safety of Machinery, General Requirements, and Risk Assessment
ANSI B11.19 Performance Criteria for Safeguarding
NFPA 79 Electrical Standard for Industrial Machinery
International/European Standards
EN ISO 12100 Safety of Machinery – General Principles for Design — Risk Assessment and Risk Reduction
ISO 13850 (EN 418) Emergency Stop Devices, Functional Aspects – Principles for Design
IEC 62061 Functional Safety of Safety-Related Electrical, Electronic and Programmable Control Systems
EN ISO 13849-1 Safety-Related Parts of Control Systems
IEC/EN 60204-1 Electrical Equipment of Machines Part 1: General Requirements
EN 60947-1 Low Voltage Switchgear – General Rules
EN 60947-5-1 Low Voltage Switchgear – Electromechanical Control Circuit Devices
EN 60947-5-5 Low Voltage Switchgear – Electrical Emergency Stop Device with Mechanical Latching Function
EU/UK Declaration of Conformity (DoC)
Banner Engineering Corp. herewith declares that these products are in conformity with the provisions of the listed directives,
regulations, and all essential health and safety requirements have been met. For the complete DoC, please go to
www.bannerengineering.com .
Product Directive
SSA-EB1P and PL Emergency Stop Push Button EU: Machinery Directive 2006/42/EC; Low Voltage Directive
2014/35/EU
UK: Machinery (Safety) Regulations 2008
Representative in EU: Spiridon Lachanidis, Managing Director, Banner Engineering Europe Park Lane, Culliganlaan 2F bus 3,
1831 Diegem, BELGIUM
SSA-EB Series Emergency Stop Push Button
P/N 194992 Rev. D www.bannerengineering.com - Tel: + 1 888 373 6767 11