Banner Q5Z, Instruction Manual

Page: 10 / 41

June 23, 2023
Q5Z Global Laser Measurement Sensor With IO-Link Instruction Manual
10
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
High excess gain
Standard excess gain mode with increased ambient light immunity
The delay timer is pre­configured to one of the following options.
If a delay timer is needed, contact Banner Engineering.
No Delay
Delay timer(s) enabled
1­Shot enabled
Totalizer enabled
Output 1 is pre­configured to one of the following options.
Light Operate (LO)
Dark Operate (DO)
Output 2 is pre­configured to one of the following options.
Light Operate (LO)
Dark Operate (DO)
Complementary output to CH1
Remote TEACH input
Laser inhibit input
Laser enable input
Master sync line output for two­sensor cross­talk avoidance
Slave sync line output for two­sensor cross­talk avoidance
Pulse Frequency Modulation (PFM) output (see
"Pulse Frequency Modulation (PFM) Output" on page 18 )
For more details, see " Channel 2 Output or Function " on page 17 .
To configure the sensor for master­slave operation, see "Sync Master/Slave" on page 17 .
Delay Timer
2.4
Channel 1 Output
2.5
Channel 2 Output/Function
2.6
© Banner Engineering Corp.