Banner Q5Z, Instruction Manual

Page: 12 / 41

June 23, 2023
Q5Z Global Laser Measurement Sensor With IO-Link Instruction Manual
(1)
Applying tilt to sensor may improve performance on reflective targets. The direction and magnitude of the tilt depends on the application, but a 15° tilt is often
sufficient.
12
Continued from page 11
(Optimal)
CC
bk (4)
bn (1)
bu (3)
wh (2)
10-30 V DC
CH1
CH2
+
–
Load
Load
bk (4)
bn (1)
bu (3)
wh (2)
10-30 V DC CH1
CH2
+
–
Load
Remote Input
1
4
3
2
NPN Discrete Outputs
bk (4)
bn (1)
bu (3)
wh (2)
10-30 V DC
CH1
CH2
+
–
Load
Load
PNP Discrete Outputs
bk (4)
bn (1)
bu (3)
wh (2)
10–30 V DC
CH1
CH2
+
–
Load
Load
Continued on page 13
Orientation for a color or
luster difference
Figure 8.
Orientation for highly re­
flective target
(1)
Figure 9.
Mount the Device
3.2
If a bracket is needed, mount the device onto the bracket.
1.
Mount the device (or the device and the bracket) to the machine or equipment at the desired location. Do not tighten
the mounting screws at this time.
2.
Check the device alignment.
3.
Tighten the mounting screws to secure the device (or the device and the bracket) in the aligned position.
4.
Wiring Diagram
3.3
Channel 2 as PNP Discrete or PFM
Output
Figure 10.
Channel 2 as Remote Input
Figure 11.
Channel 1 = NPN Output, Channel 2 = NPN
Output Figure 12. Channel 1 = PNP Output, Channel 2 = PNP
Output Figure 13.
© Banner Engineering Corp.