Banner LTF, Instruction Manual

Page: 46 / 60

June 22, 2023
LTF Time Of Flight Laser Distance Sensor Instruction Manual
46
TEACH Analog Output and Discrete Output Midpoints Togeth-
er
Use the following procedure to teach an identical Analog Output 12 mA (5 V) point and Discrete Output midpoint (switch
point) at the same time using the remote input.
This feature is not available using the buttons. Note that if the window sizes
and/or offsets were set independently (using the buttons), the windows taught using the following procedure could be differ-
ent.
When the Discrete Output is set to Switch Mode, the SPt TEACH is executed with SPtRef=Custom and Offset=0 mm.
Action Result
Single-pulse the remote input.
T
"TchA&D2 Teaching" displays while the sensor is being
taught.
TEACH Accepted
The new value displays on the second line of the dis-
play, flashes, and the sensor returns to Run mode.
TEACH Not Accepted
" FAIL" flashes, the sensor returns to step 2, and "RMT
TCH " displays.
Access the TEACH mode.
Action Result
Single-pulse the remote input.
T
" RMT TCH" and the current measurement
value display.
1.
Present the target.
Action Result
Present the midpoint (switch point) target.
" RMT TCH"and the target's measurement
value display.
2.
TEACH the sensor.
Action Result
Six-pulse the remote input.
T T
T
T
T
T
T
T
T
T
T
" TchA&D Teaching " displays while the sen-
sor is being taught.
TEACH Accepted
The new value displays on the second line of
the display, flashes, and the sensor returns
to Run mode.
TEACH Not Accepted
" FAIL" flashes, the sensor returns to step 2,
and "RMT TCH " displays.
3.
© Banner Engineering Corp.