Banner LTF, Instruction Manual

Page: 28 / 60

June 22, 2023
LTF Time Of Flight Laser Distance Sensor Instruction Manual
28
Remote Input Instructions
Window TEACH Offset
Use the D_OUT › TchMid › Offset menu to set an offset from the taught distance used during a Midpoint TEACH. By default,
the value is 0 mm because the window is centered around the taught distance. A positive offset value always shifts the win-
dow towards the sensor.
Adjust Switch Point One
The AdjSPt1 option manually adjusts the value of the switch point one threshold for the Discrete Output when the sensor is in
Window mode. The value is adjustable within the sensor's range. It is required to be maintain the minimum window size be-
tween switch points. This menu is not available when the sensor is in Switch, Alarm, or Health mode.
Navigate : MENU › D_OUT › AdjSPt1
Action Result
Navigate: MENU › D_OUT › TchMid › TchMdPt
"TchMdPt Teaching " displays while the sen-
sor is being taught.
TEACH Accepted
The new value is shown on the second line
of the display and flashes before it is saved
and the sensor returns to "
TchMid Tch-
MdPt ".
TEACH Not Accepted
" FAIL" and a warning message display, and
the sensor returns to "TchMid TchMdPt ".
Access the TEACH mode.
Action Result
Single-pulse the remote input.
T
"RMT TCH" and the current measurement
value display.
1.
Present the target.
Action Result
Present the target.
"RMT TCH" and the target's measurement
value display.
2.
TEACH the sensor.
Action Result
Five-pulse the remote input.
T T
T
T
T
T
T
T
T
"TchMdpt Teaching " displays while the sen-
sor is being taught.
TEACH Accepted
The new value displays on the second line
of the display, flashes, and the sensor re-
turns to Run mode.
TEACH Not Accepted
" FAIL" and a warning message display, the
sensor returns to step 2, and "RMT TCH"
displays.
3.
© Banner Engineering Corp.