Banner LTF, Instruction Manual

Page: 29 / 60

June 22, 2023
LTF Time Of Flight Laser Distance Sensor Instruction Manual
29
Remote Input : Not available
Default : 50 mm
Adjust Switch Point Two
The AdjSPt2 option manually adjusts the value of the switch point two threshold for the Discrete Output when the sensor is in
Window mode. The value is adjustable with the sensor's range. It is required to be maintain the minimum window size be-
tween switch points. This menu is not available when the sensor is in Switch, Alarm, or Health mode.
Navigate : MENU › D_OUT › AdjSPt2
Remote Input : Not available
Default : 12000 mm for LTF12; 24000 mm for LTF24
TEACH Switch Point
The TchSPt option teaches the distance at which the switch point threshold is placed when the Discrete Output is in Switch
mode. This menu is not available when the sensor is in Window, Alarm, or Health mode.
Navigate : MENU › D_OUT › TchSPt
Remote Input : Available
Button Instructions
Remote Input Instructions
Present the target.
Action Result
Present the target. The target must be within the sensor's range.
The target's analog output measurement
and distance measurement value display.
1.
Access the switch point TEACH mode and TEACH the sensor.
Action Result
Navigate: MENU › D_OUT › TchSPt
"TchSPt Teaching" displays while the sensor
is being taught.
TEACH Accepted
The new value is shown on the second line
of the display and flashes before it is saved
and the sensor returns to "D_OUT TchSPt
".
TEACH Not Accepted
" FAIL" and a warning message display, and
the sensor returns to "D_OUT TchSPt ".
2.
Verify the sensor is in Switch mode.
1.
Access the TEACH mode.
Action Result
Single-pulse the remote input.
T
"RMT TCH" and the current measurement
value display.
2.
Present the target. 3.
© Banner Engineering Corp.