Banner L-GAGE LTF12 Instruction Manual Download Page 13

Page: 13 / 49

June 22, 2023

LTF Time Of Flight Laser Distance Sensor With IO-Link Instruction Manual

Chapter Contents

...................................................................................................................................................................................................... 13

LTF Sensor Menu (MENU)

................................................................................................................................................................................ 14

Remote Input

................................................................................................................................................................................................... 14

Locking and Unlocking the Sensor

.................................................................................................................................................................. 16

Program the sensor using the buttons on the sensor or the remote input (limited programming options).

From Run mode, use the buttons to access the Quick Menu and the Sensor Menu. See

Quick Menu

" on page

and

LTF Sensor Menu (MENU)

" on page 14

for more information on the options available from each menu. For TEACH

options, follow the TEACH instructions.

In addition to programming the sensor, use the remote input to disable the buttons for security, preventing unauthorized or

accidental programming changes. See

Remote Input

" on page 14

for more information.

Accessing the menus

from Run Mode

Access

Quick Menu

Access

Sensor Menu

See

Quick Menu

" on page 13

See

LTF Sensor Menu (MENU)

" on page 14

Quick Menu

The sensor includes a Quick Menu with easy access to view and change the discrete output switch points. Access the Quick
Menu by pressing

Down

from Run mode. When in the Quick Menu, the current distance measurement displays on the

first line and the menu name and the discrete output switch points alternate on the second line of the display. Press

Enter

access the switch points. Press

Down

and

to change each digit. Press

Enter

to move right one digit. After reviewing each

digit, press

Enter

again to save the new value and return to the Quick Menu. Press

Cancel

to ignore any changes made if on-

ly some digits have been changed.

Sensor Programming

Chapter 3

Summary of Contents for L-GAGE LTF12
















































Search results

Summary of Contents for L-GAGE LTF12

Reviews:

Banner L-GAGE LTF12, Instruction Manual, Page: 13 / 49

Search results

Summary of Contents for L-GAGE LTF12

Reviews: