Banner L-GAGE LTF12, Instruction Manual, Page: 17 / 49

June 22, 2023
LTF Time Of Flight Laser Distance Sensor With IO-Link Instruction Manual
17
•
•
•
•
•
Discrete Output Menu (D_OUT)(Dx_OUT)
Use this menu to view or change
Setpoints
Midpoint
Mode
Timers
Polarity
Discrete Output Menu Maps
MENU D2_OUT
or
or
Go Back to Parent Menu
Select Menu Item
Press to Save Setting
Press and Hold to Go Back
to Run Mode
OffDly 0 ms
Off1Sho 0 ms
OnDly 0 ms
On1Sho 0 ms
Tch2Pt TchSPt2
Tch2Pt TchSPt1
WndSize 20mm
TchMdPt
TchMid TchMdPt
Offset 0 mm TchMid Offset
TchMid WndSize
Timer On1Sho
Timer OffDly
Polarity NPN
Polarity PNP
Timer Off1Sho
Timer OnDly
D2_OUT Tch2Pt
D2_OUT TchMid
D2_OUT Polarity
D2_OUT Timer
D2_OUT AdjSPt1
D2_OUT AdjSPt2
Default Setting
MENU D1_OUT
OffDly 0 ms
Off1Sho 0 ms
OnDly 0 ms
On1Sho 0 ms
TchSPt1 50mm
TchSPt2 12000mm
Tch2Pt TchSPt2
Tch2Pt TchSPt1
W00020mm
TchMdPt 6000mm
TchMid TchMdPt
Offset 0mm TchMid Offset
TchMid WndSize
Timer On1Sho
Timer OffDly
Polarity NPN
Polarity PNP
Timer Off1Sho
Timer OnDly
A12000mm
A00050mm
D1_OUT Tch2Pt
D1_OUT TchMid
D1_OUT Polarity
D1_OUT Timer
D1_OUT AdjSPt1
D1_OUT AdjSPt2
Hyst Auto
D1_OUT Hyst
Hyst Auto
D2_OUT Hyst
Mode Health
Mode Alarm
Mode Swtch
Mode Swtch
Mode Wnd
Mode Wnd
D1_OUT Mode
SPtRef Object
SPtRef Backgrnd
D1_OUT SPtRef
(in SPt mode only)
D1_OUT Offset
SPtRef Custom
Offset 0 mm
Mode Health
Mode Alarm
Mode Swtch
Mode Swtch
Mode Wnd
Mode Wnd
D2_OUT Mode
SPtRef Object
SPtRef Backgrnd D2_OUT SPtRef (in SPt mode only)
D2_OUT Offset
(in SPtRef Custom
mode only)
SPtRef Custom
Mode PFM
Offset 0 mm
(in SPtRef Custom
mode only)
W00020mm
TchMdPt 6000mm
A12000mm
A00050mm
Two-Point TEACH
The TchSpt1 and TchSPt2 options teach the desired switch points. When using the buttons, the switch points can be taught
independently. Both values must be taught when using the remote input. The same TEACH menus exist for both the
D1_OUT and D2_OUT, but the switch points are set independently.
NOTE: When in Switch mode, see " TEACH Switch Point " on page 21 .
Navigate: MENU › Dx_OUT › Tch2Pt › TchSPt1 and navigate: MENU › Dx_OUT › Tch2Pt › TchSPt2
Remote Input : Available
Button Instructions
Present the target.
Action Result
Present the target. The target must be within the sensor's range..
The target's distance measurement value
displays.
1.
Access the TEACH mode and TEACH the sensor. 2.
© Banner Engineering Corp.