background image

D12 Expert Series – 

TEACH-Mode Fiber Optic Sensors

One-button programmable sensors for use with glass or plastic fibers

Printed in USA

P/N 41974G8B

**NOTE:9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., D12EN6FP W/30)

D12 Expert Series Glass Fiber Optic Models

D12 Expert Series Plastic Fiber Optic Models

Models

Switching Threshold

Setting

Cable**

Supply

Voltage

Output Type

Maximum Range

D12EN6FV

Just above the “dark”
condition

2 m (6.5')

10-30V dc

NPN (sinking)

Range varies by sensing mode and fiber
optics used; see page 11.

D12EP6FV

PNP (sourcing)

D12E2N6FV

Midway between “dark”
and “light” conditions

NPN (sinking)

D12E2P6FV

PNP (sourcing)

D12EN6FP

Models

Switching Threshold

Setting

Cable**

Supply

Voltage

Output Type

Maximum Range

Just above the “dark”
condition

2 m (6.5')

10-30V dc

NPN (sinking)

Range varies by sensing mode and fiber
optics used; see page 12.

D12EP6FP

PNP (sourcing)

D12E2N6FP

Midway between “dark”
and “light” conditions

NPN (sinking)

D12E2P6FP

PNP (sourcing)

IMPORTANT: SEE SAFETY USE WARNING ON PAGE 4

D12 Expert Features

Fiber optic sensors for DIN rail mounting; 10 to 30V dc operation

Visible red (680 nm) light source; models for use with either glass or plastic fibers 

High optical sensing power when needed, also excels at low-contrast sensing

Easy TEACH-mode programming automatically adjusts sensitivity to optimal setting*

D12E sensors are designed for low-contrast sensing applications (switching
threshold set to just above the “dark” condition)

D12E2 sensors set their switching threshold midway between the “dark” and
“light” conditions to ignore subtle changes, such as web flutter

Output may be programmed for either light or dark operate 

Fast 200 microsecond sensing response; Programmable 40 millisecond pulse
stretcher

Secure one-button programming is easy to use; one button sets both TEACH and
sensor configuration settings 

7-segment LED bargraph indicates relative received signal strength and sensing
contrast, programming status, and diagnostic trouble warnings

Marginal sensing alarm

Separate input allows remote programming by an external device, such as a
switch or a process controller

*U.S. Patent #5808296

Summary of Contents for Expert D12 Series













Reviews: