July 17, 2023
Asset Monitoring Gateway With SNAP ID Instruction Manual
6
Change the location name by tapping the menu entry
Enter Location
and entering a valid location. Select the
Utilities
menu to
bring up the main configuration and gateway information window.
Commission and Assign Connected Sensors or Converters
After the AMG has initialized (about one minute), touch the
Utilities
icon in the lower right corner of the main page to
go to the main configuration/device information menu.
Utilities screen
1.
In the
Sensor Utilities
column, touch
Sensor Scan/ID Assign.
The Sensor table will initially be unpopulated.
2.
Connect any supported Banner Modbus sensor or S15 converter using a splitter cable or hub with power connected
to the homerun cable and a branch connected to the Gateway M12 connector on the bottom right of the enclosure.
See the Asset Monitoring Gateway with SNAP ID Brochure, p/n
for lists of supported S15 converters,
Modbus sensors, and accessories.
3.
Select
Scan IDs
and touch
YES
when prompted to confirm.
4.
© Banner Engineering Corp.
