July 17, 2023
Asset Monitoring Gateway With SNAP ID Instruction Manual
11
Thresholds
Allows the user to configure alarm states for the selected device.
Threshold 1 (Yellow
) indicates a
warning alarm
.
Threshold 2 (Red
) indicates a
critical alarm
.
These alarm states are reflected in the group area (if the sensor has been grouped) by the asset icon changing color to
reflect the alarm state. Alarms from any attached device are also indicated on the pendant light on the top left corner of
the enclosure. Critical alarms (red) take priority, followed by yellow, then green for normal operation indication.
Set thresholds for specific registers by touching the thresholds in the table and manually typing in an alarm value. This
prompts the AMG to enable the
Mode
operator. Tap the mode operator to browse through the operands and select the in
tended one. Select
Save
when you are satisfied with the alarm data, and then
Yes
for confirmation.
Thresholds saved
ap
pears at the bottom of the screen after the settings are saved.
Sensor List Thresholds screen
Operations screen
© Banner Engineering Corp.
