P/N 118000 rev. A
5
Banner Engineering Corp.
•
Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Light Connector
(Banner lights only)
1 = Brown 24V
2 = n/a
3 = Blue (ground)
4 = Strobe
Ethernet
NTSC Video
to Monitor
12-pin Discrete
I/O Power/Ground
RS-232 Serial
(see pin
assignments below)
components/
connections
components/
connections
12-Wire Cable
Pin # Wire Color
Description
Direction
1
Yellow
RS-232 TX
Output
2
Gray
Remote Teach
Input
3
Orange
Product Change
Input
4
Pink
External Trigger
Input
5
Black
Discrete I/O #1
In/Out
6
Red
Discrete I/O #2
In/Out
7
White
Discrete I/O #3
In/Out
8
Light Blue
Discrete I/O #4
In/Out
9
Violet
RS-232 RX
Input
10
Green
RS-232 Signal Ground
Output
11
Blue
Common (Signal Ground)
Input
12
Brown
10-30V dc
Input
TIPS
The trigger device
can be any
10-30V dc
photoelectric
sensor, or a
device with a
similar output.
4.
Connect the Sensor power-discrete I/O wires (the leads on
the 12-wire furnished cable) to the appropriate locations
(see chart below).
Crossover Ethernet Cable
(to PC Ethernet Port)*
STPX07 — 2.1 m (7')
or
STPX25 — 7.6 m (25')
Monitor Cable (to Video Monitor, optional)
BNC06 — 2 m (6')
BNC15 — 5 m (15')
BNC30 — 9 m (30')
* The Sensor can be connected to the PC via a serial cable or an Ethernet network;
Ethernet provides faster communication.
Standard Ethernet Cable
(to PC via Network Hub or Switch)
STP07 — 2.1 m (7')
STP25 — 7.6 m (25')
