P/N 118000 rev. A
9
Banner Engineering Corp.
•
Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Tool Options
NOTE: Tool availability depends on P4 model.
creating
inspections
creating
inspections
This screen automatically configures the parameters chosen
in the Tools screen.
a.
Choose the sample size
b.
Click
Start
c.
Trigger the controller with the external trigger device
d.
Click
Stop
e.
Click
Next
to proceed to
Run
Before entering
Run
, save the inspection file to one of the
12 memory locations on the Sensor.
3.
TIPS
• Each inspection
must contain at
least one Vision
tool and one
Test tool.
• Save a backup
copy of your
inspection to
the host PC.
Tool Name
Function
Description
Location
Tools
GEO Find
Translation and rotation
Locates the target by searching for a taught
pattern and compensates for translation and
rotation.
Locate
Translation and rotation
Finds the edge of the part and compensates for
translation and rotation (if selected).
Vision
T
ools
GEO Count
Finds one or more patterns
Locates and counts a taught pattern.
Edge
Counts and locates edges
Detects and counts transitions between bright
and dark pixels. The total number of edges can
be counted, and the position of each edge can
be found.
Object
Locates and counts objects,
determines midpoints, and
measures widths
Detects the edges of dark and bright objects,
locates their midpoints, counts dark and bright
objects, and measures the width of each dark
and bright object.
Analysis
Tools
Measure
Measures between points
Measures distance between two prescribed
points. These points can be either edges or
centroid locations.
Test
Logic
input/output
Evaluates results of selected Vision and
Analysis tools to determine whether an
inspection passes or fails. It also performs
logical operations and activates outputs.
