banks Derringer, Owner'S Manual, Page: 17 / 18

Code Event Course of Action
1,1
Throttle Inlet Pressure (TIP)
Input Voltage
Out of Range.
Turn ignition OFF and check the male and female
TIP sensor connectors. Turn ignition back ON and
re-check for presence of code. If code does not
re-appear at key ON, start engine and check for
presence of code both at engine idle and under
varying driving conditions.
1,2
Manifold Absolute Pressure
(MAP) Input Voltage Out of
Range.
Turn ignition OFF and check the male and female
MAP sensor connectors. Turn ignition back ON
and re-check for presence of code. If code does
not re-appear at key ON, start engine and check
for presence of code both at engine idle and
under varying driving conditions.
2,1
Throttle Inlet Pressure (TIP)
Output Voltage
Out of Range.
Turn ignition OFF and check the male and female
TIP sensor connectors. Turn ignition back ON and
re-check for presence of code. If code does not
re-appear at key ON, start engine and check for
presence of code both at engine idle and under
varying driving conditions.
2,2
Manifold Absolute
Pressure (MAP)
Output Voltage Out of Range.
Turn ignition OFF and check the male and female
MAP sensor connectors. Turn ignition back ON
and re-check for presence of code. If code does
not re-appear at key ON, start engine and check
for presence of code both at engine idle and
under varying driving conditions.
3,4
OBDII / BanksBus
CAN
communication error
Turn ignition OFF and check the following
connections (as applicable):
1) 61300-35 OBD-II Interface Cable - at 16-pin
vehicle OBD-II and 4-pin inter-cable connectors.
2) 61301-21 Y-Adapter Cable - at 4-pin inter-
cable and 6-pin inter-cable connectors.
3) 61301-20 B-Bus Starter Cable - at 6-pin inter-
cable and 6-pin B-Bus Circular connectors.
4) 61300-22 B-Bus Terminator Plug - at 6-pin
B-Bus Circular connector.
Turn ignition back ON and re-check for presence of
code. If code does not re-appear at key ON, start
engine and check for presence of code both at
engine idle and under varying driving conditions.