FEEDBANK 600
10
BANKS OUTDOORS
1. Unpack the Feedbank from the box. You should have 6 main parts.
2. To attach cover, place it on top of the feeder so the locking tabs are
above the (2) latches on each side. Latch over the top of the tabs to
secure the cover.
3. To install the feeder port, first take a t-style thumb bolt and slide a
lock washer on and then a fender washer. Take the t-style thumb bolt
with washers and slide the bolt from the inside of the port out. Match
up to the treaded insert at the bottom of the body of the feeder and
screw the bolt to it, attaching the feed port. Do the same thing to the
second bolt for that feed port. Repeat this for all ports.
INCLUDED PARTS:
(1) Feeder
(4) Feed Ports
(8) T-Style Thumb Bolts
(1) Cover
(8) 1” Fender Washers
(8) 1/4” Lock Washers
Summary of Contents for FEEDBANK 40
Page 1: ...INSTRUCTIONMANUAL...
