3.Keep the screwdriver still on stand-by interface and
hold the key for 0.5 second, the screwdriver will rotate
in the same direction as that of previous use.
Stand-by interface:
Working interface:
VI. Parameter Setting
1. Manual setting
Press the key continuously thrice on stand-by interface
to enter setting mode, and long press the button or wait
for 1.5 seconds to quit the setting mode. There are five
torque shifts in setting mode:
Shift A adopts an automatic mode,
in which the rotation speed of
screwdriver increases with the
increase of rotation angle.
Shift 1 to 4 correspond four
torques, which decrease gradually.
●
●
5
4
、
ES120 will automatically turn off if kept still for 15
seconds.
