Setting up Playmaker - iOS device 6
iOS device
For iOS devices, use the Bang & Olufsen app
BeoSetup
to change the product name, update the software and check/set up the network
connection. The iOS device must be on the same network as the Playmaker!
> Download and install the BeoSetup app from App Store (click or scan the QR code to be linked directly there).
LAN setup
> Connect the mains cable from the product to the mains supply and wait for the product
to connect to the network (approximately one minute - the network indicator becomes
solid white).
> Start the app
BeoSetup
. The application will now locate and show a list of Bang &
Olufsens products connected to the network.
>
Select the product - the product name is shown as Playmaker_xxxxxxxx ('x' = serial
number).
If the product list is empty, it means that the Playmaker was not assigned an IP address
THENETWORKINDICATORmASHESORANGE )NTHISCASECONTINUETO3TATIC)0ADDRESS
Now the setup page for the product is shown (illustrated to the right):
,@MT@KBNMÖFTQ@SHNM
Static IP address (DHCP disabled) ...
(ESGDQNTSDQHRBNMÖFTQDCVHSG#'"/CHR@AKDCSGD/K@XL@JDQLTRSADRDSTOVHSG@RS@SHB(/@CCQDRR
> Choose
SHOW ADVANCED SETTINGS
to open the section for manual IP settings (illustrated
to the right
)
.
> Remove the checkmark for
Use DHCP
SGDÖDKCRENQL@MT@K(/RDSSHMFRADBNLDR@BSHUD
%HKKHMSGDÖDKCRENQ(/RDSSHMFRL@QJDCVHSG
*
@BBNQCHMFSNSGDQNTSDQBNMÖFTQ@SHNM
> If a proxy server is needed, checkmark
Use proxy server
@MCÖKKHMSGDÖDKCR
*
.
> Press the
APPLY CHANGES
button to save settings.
WLAN setup
See next page.