Final setup 10
Final setup
Name the Playmaker
(MNQCDQSNNOSHLHYDD@RXHCDMSHÖB@SHNMNE/K@XL@JDQHMSGDMDSVNQJDRODBH@KKXHERDUDQ@KOQNCTBSR@QDBNMMDBSDCHMSGDMDSVNQJHSHRQDBNLLDMCDCSN
rename the Playmaker.
> Choose the
NETWORK
tab to go to the settings menu.
2DKDBSSGDÖDKCENQ
Product name
and rename the product of your choice.
E.g. Playmaker_Living Room
> Press the
APPLY CHANGES
button to save settings.
Software update
(SHRHLONQS@MSSG@SSGD/K@XL@JDQG@RSGDK@SDRSRNESV@QDSNDMRTQDADRSONRRHAKDODQENQL@MBD2NESV@QDTOC@SDQDPTHQDR(MSDQMDSBNMMDBSHNM@MCSG@SSGD
product is wire connected to the network router or switch. Follow the procedure below to check for updates:
> Choose the
UPDATE PRODUCT SOFTWARE
menu from the setup page.
> Read the
CAUTION
section before proceeding the update.
> When ready, press the
YES
button to start the update.
#TQHMFSGDRNESV@QDTOC@SDOQNBDRRSGD/K@XL@JDQLTSDHMCHB@SNQVHKK×@RGQDC6GDM
SGDRNESV@QDTOC@SDHRÖMHRGDCSGDOQNCTBS@TSNL@SHB@KKXQDRS@QSR3GDOQNCTBSHRQD@CXENQ
use, when the network indicator becomes solid white.
Option programming (optional)
The Option programming tells the product how to react on IR-commands from the remote control. The following options are available:
Option:
0
- IR receiver is switched off (no reaction on IR-commands).
4
/K@XL@JDQOK@BDCHMSGDR@LDQNNL@[email protected]@MCRLTRSADOQDÖWDCVHSG
LINK
(e.g.
LINK + A.MEM
).
5
- The product responds directly to its own codes (
A.MEM
or
A.AUX
)
.
> Press
V
+
t
SNNODMSGDBNMÖFTQ@SHNMLDMT
> Press
t
until
OPTION?
is shown in the display and press
GO/CENTRE
.
> Press
t
until
A.OPT
is shown in the display and press the desired digit (option
0/4/5
).
