Bang & Olufsen DVD 2, Manual

Page: 48 / 64

Connect your DVD player to your
television via the connection panel
on the rear of your DVD player.
You also have the possibility to
connect additional equipment to your
DVD player via the front and rear
connection panels.
For further information about
connection of additional equipment,
refer to the Guides enclosed with the
equipment.
Connection panels
CAM 2 (DV-IN)
For connection of a Digital Video camcorder. Press
GO then 5 on the remote control to select ‘CAM2’
when using this input source. If CAM2 does not
appear, use or to bring up ‘CAM2’.
CAM 1 (R AUDIO L – VIDEO)
Video and audio inputs for connection of a
camcorder or additional sources.
CAM 1 (S-VIDEO)
For connection of additional video equipment.
Record from camcorder, DV camcorder or
other external sources …
You can record from a camcorder, a DV camcorder
or other external sources to the hard disc.
> Connect the source to the DVD player.
> Press
GO then 5 and follow the on-screen
instructions.
> Start playback on the connected source and
press RECORD twice on the remote control.
If you do not mark the contents for which you
wish to record to the DVD player when recording
from camcorder or DV camcorder, the contents
will be cleared.
Sockets on the front panel
S VIDEO VIDEO
CAM 1
AUDIO L R DV-IN
CAM 2
48
NOTE! On some Bang & Olufsen televisions you
just need to press RECORD once to start recording.
These television do not have record lock, so you
can not change channel or switch off the television
without disrupting the recording.