Bang & Olufsen DVD 2, Manual

Page: 21 / 64

Record from other sources …
You can start a recording of other sources than
the DVD tuner, such as a set-top box.
> While watching a programme, press RECORD
twice on the remote control to start recording*.
> Press STOP twice to stop recording. Otherwise,
it will stop automatically after six hours of
recording.
Do not switch source or channel, and do not switch
the television and the source you are recording
from to standby during recording. If you do so
the DVD player will lose the connection to the
television and the source you are recording from.
Changing channels during recording …
If the television’s tuner is selected when it receives
a RECORD command it will take up to 40 seconds
for the DVD player to search through the tuned
channels for a matching channel. During this time
the indicator light flashes orange on and off. Do
not change channel before the flashing has stopped,
and the indicator light is constant orange. Do not
change channel if the channel you are recording
from is only tuned in on the television and not on
the DVD player. If you do that, recording will
continue from the new selected channel.
21
NOTE! You can not start a new recording if there
is a recording already in progress, or if the hard
disc is full of protected recordings.