Bang & Olufsen DVD 2, Manual

Page: 33 / 64

Merge or split a chapter
You can create a chapter by using the SPLIT
option and insert a chapter marker or by
using the MERGE option and remove a
chapter marker.
> During playback of a recording, press GO then
3 on the remote control to enter edit mode.
> Press the green button on the remote control
for CHAPTER. The chapter editing menu
appears.
> Press or on the remote control to search
for the scene you want to edit, then press STOP .
> Press the matching coloured buttons on the
remote control to access the options displayed
at the bottom of the menu.
> Press the green button to return to the
previous screen.
> Press GO then 3 to exit edit mode.
To merge a chapter …
> Press the red button on the remote control to
merge the current chapter with the chapter
before it. If the two chapters were hidden, then
the joined chapter will also be hidden.
To split a chapter …
> Press the yellow button to insert a new chapter
marker at the current point of playback. This
will allow you to access a specific point in the
recording easily or set a chapter you wish to
hide, such as commercial scenes.
There is a limit on chapter markers that can be
stored within a recording and on the hard disc.
Hide unwanted scenes
You can choose to hide certain scenes for
playback (e.g. skipping a commercial scene)
or make the hidden scene visible again.
> During playback of a recording, press GO then
3 on the remote control to enter edit mode.
> Press or on the remote control to search
for the scene you want to edit, then press STOP .
> Press the blue button on the remote control for
HIDE. It will set the start marker for hide.
> Press on the remote control to search for the
end of the scene to hide, then press the green
button for STOP HIDE. It will set the end marker
for hide. The ‘hidden’ area will be greyed out.
Otherwise, cancel the operation by pressing the
blue button on the remote control for CANCEL.
> Press GO then 3 to exit edit mode.
Show hidden scenes …
> During playback of a recording, press GO then
3
on the remote control to enter edit mode.
While in video editing mode, the hidden chapter
will play.
> Press the blue button on the remote control for
SHOW. It will mark the beginning of the scene
to show.
> Press on the remote control to search for the
end of the scene to show, then press the green
button for STOP SHOW. Otherwise, cancel the
operation by pressing the
blue button on the
remote control for CANCEL.
> Press GO then 3 to exit edit mode.
All the hidden chapters will be played back while
in video editing mode.
33