82
HDMI Matrix
The HDMI Matrix itself is a
physical product that can be
connected allowing you to
connect up to 32 external
sources to up to 32 televisions in
different rooms and access the
sources either individually from
each TV or simultaneously from
several rooms via
BeoRemote One.
The HDMI Matrix must be
connected and set up by your
Bang & Olufsen retailer.
You cannot connect more than one HDMI
Matrix in a setup.
Settings in the HDMI MATRIX menu
In the HDMI MATRIX menu, you can select
settings for your HDMI Matrix.
Connect an HDMI Matrix …
> Open the HDMI MATRIX menu.
> Highlight MATRIX CONNECTED and
press or to open the selection.
> Select an HDMI socket and press the
centre
button twice.
> Download a PUC table for the connected
HDMI source. Follow on-screen
instructions.
> Highlight the downloaded PUC table and
press the
centre
button.
> Select a PUC socket and press the
centre
button to store the HDMI Matrix settings.*
1
> Press the
centre
button to continue.
1
*Settings for the PUC socket are made
automatically upon pressing the
centre
button. However, if you need to set up
control type and modulation mode manually,
you must press the
red
button and follow
on-screen instructions instead.
The HDMI Matrix is now configured. Then
you have to configure the sources
connected to the HDMI Matrix in the
SOURCE LIST menu by pressing the
red
button for each source. This is done the
same way as other connected equipment.
For information about setting up additional
equipment, see page 23
.
If you at a later time disable a stored HDMI
Matrix configuration by setting the HDMI
Matrix field to NO, your settings for INPUTS
are still saved. This means that if you enable
the HDMI Matrix, the settings reappear.
To unconfigure a source
see page 24
.
MENU
SETUP
PRODUCT INTEGRATION
B&O CONNECT
HDMI MATRIX
