ServiceTool - SoundHeart functions 54
- Wired connection - Direct Connect
- Connect the Ethernet connector of a ServiceTool (computer) to
the ETHERNET socket of the BeoSound Moment hub
(SoundHeart) using a LAN cable. See illustration.
- In the bottom bar to the left, select the network adaptor used.
- Press
Direct Conect
to initiate the connection - wait a while.
By this method the ServiceTool is connected to the BeoSound
Moment hub (SoundHeart) only. BeoSound Moment may loose
connection to the home router/AP.
Connect ServiceTool computer to BeoSound Moment interface (Jukebox)
- Open the
Jukebox > Jukebox
menu and read instructions on
how to connect the ServiceTool to the product.
- Enter BeoSound Moment interface (Jukebox) into production mode by:
1 Move the BeoSound Moment interface (Jukebox) away from charging on the BeoSound Moment hub (SoundHeart).
2 Tap 4 times on centre of the aluminium touch wheel and then tap on upper right corner of the display within 3 seconds: display will turn blank.
3 Single tap on centre of display, just above the midline: Keyboard appears.
4 Enter the password ‘2807’ and press
Done
and wait approx 60 seconds.
5 Jukebox will reboot and reveal Production menu.
6 Press on the
IP Address
button to read the IP address of the
BeoSound Moment interface (Jukebox)
.
- In the ServiceTool:
-
Enter the IP address in the entry fields manually.
- Press the
Connect
button. It may take several tries to connect - depending on the wireless connection.
The ServiceTool can then be used for any of the functions described in
.
I/O
Summary of Contents for BeoSound Moment
Page 69: ...69...
