Nice to know 50
Convert music formats
Music stored in the WMA lossless and AAC lossless formats are not supported, but can be converted to the FLAC file format.
If music is streamed from BeoSound 5/BeoMaster 5, the WMA lossless files will be transcoded on-the-fly, when 'Transcoding' is set to On.
The following apply to music formats:
- MP3 (all) or VBR/CBR 32 to 320 kbit
- WMA, both VBR/CBR 32 to 320 kbit (no support for WMA Lossless)
- AAC (ISO and ADTS) -> 320 kbit (no support for AAC Lossless)
- ALAC g 88.2, 96 kHz
- PCM (WAV) general 88.2, 96 kHz
- FLAC, 8 to 96 kHz, 16 or 24 bits, 2 channels
Copy Spotify play lists to Deezer
Play lists in Spotify may be converted to the Deezer account using the free ware on
. Both accounts must be opened on the computer
simultaneously. Follow the instructions on Spotizr.com step by step.
3
rd
party speakers
Non Bang & Olufsen speakers may be connected. If needed a cable adapter from RCA connectors to RJ45 may
be required. Insert the RJ45 plug into one of the SPEAKER sockets.
To make use of the speakers and to make the speaker setup, make an PL-sense test plug (RJ45) as illustrated and insert this
into the other SPEAKER socket (RJ45). By this the PL-sense is On.
Note: The 3
rd
party speakers are set up in the BeoSound Moment as
Other
. The speaker volume is either controlled directly
on the active speakers or on the amplifier connected to the speakers.
Set up
- Remove the Socket cover.
- Press
Sound > Set up wired speakers
.
- Press
in the speaker type field and select
Other
.
- Use
Locate
to decide which speaker is for which channel and ensure correct placement afterwards.
If speaker type is chosen to
Line
the volume cannot be controlled dynamically by the BeoSound Moment interface (Jukebox). Instead volume is set
to a fixed level
.
When speaker type is set to
Other
t
he speaker volume can either be controlled directly on the active speakers or on the amplifier connected to the
speakers.
8
1
Pin 4
Shield
120 kohm
Summary of Contents for BeoSound Moment
Page 69: ...69...
