background image

Connection panel – BeoPlay V1–32

Important 

Any equipment you connect to the connection panel must be registered in the 

SOURCE LIST SETUP menu. 

 

Mains cord and plug 

Connect the 

socket on the connection panel of your TV to the wall outlet. 

The TV is in standby mode and ready to be used. 

The supplied plug and mains cord are specially designed for the product. Do 

not change the plug and if the mains cord is damaged, you must buy a 

Bang & Olufsen approved mains cord. 

1

*Make sure the cable connection between the 

product and the router does not exit the building 

to avoid contact with high voltage.

Ethernet ( )*

1

For connection to the Internet. 

For software updates or for 

UPnP streaming of digital photos, 

video or music files from, for 

example, a NAS device

SATELLITE (14/18V – 0.4A) 

Aerial input socket for a digital satellite signal. 

Depending on your tuner options, you may have 
either one or no satellite socket. Never connect an 

optional active antenna here

2 x COMMON INTERFACE

 (CA Module) 

For insertion of a CA module and smart card 
for access to coded digital channels. For more 

information about compatible smart card and 

CA module combinations, contact your 

retailer. See the online guide for information 
on correct insertion*

2

USB

 (

5V – 0.5A)

 

For connection of a 

USB device to browse 

digital photos, video or 

music files

AERIAL (5V – 50mA) 

Aerial input socket for an 

external aerial/cable TV network 

or for an analogue signal

 Mains supply 

Connection to the 

mains supply

ANTENNA WLAN

For connection of wireless 

network antenna (optional)

WLAN

ANTENNA

AERIAL

COMMON INTERFACE

SATELLITE

CHIPSIDE

CHIPSIDE

5V    50mA

8

Summary of Contents for BeoPlay V1-32

























Reviews: