B&R PROVIT 3030, User Manual, Page: 28 / 64

28
3.4.3 WALL INSTALLATION
Before installing the PROVIT 3030 in the wall remove the monitor and computer modules. To install the unit
in the wall you will need:
- four M6 screws
- four M6 washers
- four contact washers
- four M6 nuts
Be sure that the wall material will hold the 28 kg of the PROVIT 3030.
Installation:
- Cut and drill holes according to the dimensions shown above (all measurements are in millimeters)
- Remove the monitor and computer modules from the housing
- Carefully place the housing into the opening
- Insert the screws with washers through the front of the PROVIT 3030 frame
- Fasten the unit in place with the contact washers and the nuts from the rear
- Put the screw covers in place
- Reinstall the monitor and computer modules
WALL INSTALLATION
465,1
450
234,9
297
32,3
atpr.p65 13.10.00, 14:49 28