manualshive.com logo in svg

B&R PROVIT 3030, User Manual, Page: 16 / 64

Share
Download
B&R PROVIT 3030 User Manual Download Page 16

16

2.3 BEFORE POWER-ON

2.3.1 AC INPUT VOLTAGE SWITCH

The PROVIT 3030 industrial PC can operate with single phase alternating current of 120 VAC (USA) or 220
VAC (Europe). Before plugging in and powering-on the voltage switch must be checked for the respective
setting (Section 4 "Device Description" contains more details). The voltage switch can be found at the rear
of the device and is labelled "Voltage Selector". The standard setting for shipping is for a 220 VAC input.

2.3.2 POWER CABLE

The power cable for PROVIT 3030 is included in the scope of delivery. The connection to the device is made
with screw-on connector. The other end is free and can be terminated with a mains plug or direct to a supply
line (section 3 "Installation" and section 4 "Device Description" contain more details).

Attention:

-

Only connectors which have protective ground may be used.

-

The installation may only be done by qualified personnel.

-

Take the precaution of knowing the regulations of electronic installations in your area.

atpr.p65

13.10.00, 14:49

16

Summary of Contents for PROVIT 3030

































































Reviews:

No comments