B&R PROVIT 3030, User Manual

Page: 18 / 64

18
2.3.5 FAN
The fan cover is not installed during transport. Included with the delivery of the PROVIT 3030 is a fan cover,
a grill for the fan and an air filter. The filter must only be used in very dusty or dirty conditions. Fan cover
installation procedure:
- Place the grill inside of the fan cover
- If required the filter is placed in the fan cover as well
- Attach the fan cover over the fan
The PROVIT 3030 Industrial PC may only be operated with the fan cover in place. Air filters are obtainable
at B&R (Section 6 "Options and Replacements" contains more information).
2.3.6 POTENTIOMETER GAIN CONTROL KNOB
Adjusting the monitor is done through the use of four potentiometers which are found on the rear of the PROVIT
3030. The control knobs for these are not attached during transport and must be installed by the user (Section
4 "Device Description" contains more information).
2.3.7 TERMINAL BLOCKS
Terminal blocks for the digital in / outputs and for the 24 VDC supply are not installed during transport. It is
up to the user to attach these to the unit.
atpr.p65 13.10.00, 14:49 18