Appendix D
212
Automation Panel 5000 User's manual V2.11
D.9.7 5ACCSE00.0005-000
D.9.7.1 USB extension RAFIX 22 FS+, 9.30.279.003/0700
Caution!
IP65 protection can only be achieved if the USB protective cover is properly installed.
Caution!
Due to the general PC specification, this interface must be handled with the utmost care with regard
to EMC, cable routing, etc.
USB extension 9.30.279.003/0700
Manufacturer
RAFI
Type
RAFIX 22 FS+
Manufacturer number
9.30.279.003/0700
Standard
USB 2.0
Variant
Type A, female
Low speed (1.5 Mbit/s)
Full speed (12 Mbit/s)
Transfer rate
High speed (480 Mbit/s)
1)
Current-carrying capacity
2)
Max. 500 mA
Cable length
USB 2.0
400 mm
Table 109: USB extension 9.30.279.003/0700
1)
In SDL operation without USB cable (mode 1), the USB transfer rate is limited to USB 1.1.
In SDL3 operation: Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (30 Mbit/s)
In SDL4 operation: Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (150 Mbit/s)
2)
The USB interface is protected by a maintenance-free "USB current-limiting switch" (max. 500 mA).
