B&R Automation Panel 5000, User Manual, Page: 121 / 216

Technical data
Automation Panel 5000 User's manual V2.11 121
Model number 5ACCMA00.0101-000
Mechanical properties
Housing
Material Aluminum, coated
Coating White aluminum (similar to RAL 9006)
Installation VESA
Dimensions
Width 280 mm
Length 259 mm
Height 60.25 mm
Weight 2.6 kg
Table 50: 5ACCMA00.0101-000 - Technical data
1) Only with proper installation on the panel.
4.2.3.6.4 USB interface
The mounting unit is equipped with a USB 2.0 interface. This is equipped with a protective cover.
Caution!
IP54 protection can only be achieved if the USB protective cover is properly installed.
Warning!
USB peripheral devices can be connected to the USB interfaces. Due to the variety of USB devices
available on the market, B&R cannot guarantee their functionality. The functionality of USB devices
available from B&R is guaranteed.
Caution!
Due to the general PC specification, this interface must be handled with the utmost care with regard
to EMC, cable routing, etc.
USB on mounting unit
The USB interface is available to the user for service purposes.
Information:
In the default configuration, the USB interface is the USB1 interface on the link module.
Depending on the transfer method (SDL or DVI operation), there are limitations regarding the transfer rate for
interfaces USB1 and USB2. For possible transfer methods, see section "Connection options" on page 21 .
Transfer method USB type Max. cable length
SDL operation without USB cable USB 1.1 25 m
SDL operation with USB cable USB 2.0 5 m
Single-touch DVI operation USB 2.0 5 m
Multi-touch DVI operation USB 2.0 5 m
SDL3 operation USB 2.0 100 m
USB on mounting unit
Standard USB 2.0
Variant Type A, female
Low speed (1.5 Mbit/s)
Full speed (12 Mbit/s)
Transfer rate
High speed (480 Mbit/s)
1)
Current-carrying capacity
2)
Max. 0.5 A
Cable length
USB 2.0 <3 m (without hub)
-
1) In SDL operation without USB cable (mode 1), the USB transfer rate is limited to USB 1.1.
In SDL3 operation: Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (30 Mbit/s)
In SDL4 operation: Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (150 Mbit/s)
2) The USB interface is protected by a maintenance-free "USB current-limiting switch" (max. 0.5 A).