manualshive.com logo in svg

B&R Automation Panel 5000, User Manual, Page: 118 / 216

Share
Download
B&R Automation Panel 5000 User Manual Download Page 118

Technical data 

118

Automation Panel 5000 User's manual V2.11

4.2.3.5 5ACCMA00.0100-000

4.2.3.5.1 General information

The mounting unit is installed on the back of the panel. It protects the installed link module / system unit.

•

For installation with a 75 x 75 and 100 x 100 VESA mount

•

Can also be installed when rotated 180°.

•

IP54 protection

Notice!

It is important to note that no cable grommets are included in delivery.
IP54 protection and UL Type 1 enclosure rating can only be ensured if appropriate cable grommets are

ordered and installed. The cable grommet must be selected to match the cable diameter.

4.2.3.5.2 Order data

Model number

Short description

Figure

Mounting units

5ACCMA00.0100-000

HMI mounting unit VESA IP54 - Leak tightness is only provided

with suitable cable grommets.

Required accessories

cable grommets

5ACCCG00.0000-000

Cable grommet lens

5ACCCG00.0304-000

Cable grommet 3-4 mm

5ACCCG00.0405-000

Cable grommet 4-5 mm

5ACCCG00.0506-000

Cable grommet 5-6 mm

5ACCCG00.0607-000

Cable grommet 6-7 mm

5ACCCG00.0708-000

Cable grommet 7-8 mm

5ACCCG00.0809-000

Cable grommet 8-9 mm

5ACCCG00.0910-000

Cable grommet 9-10 mm

5ACCCG00.1011-000

Cable grommet 10-11 mm

5ACCCG00.1112-000

Cable grommet 11-12 mm

5ACCCG00.1213-000

Cable grommet 12-13 mm

5ACCCG00.1314-000

Cable grommet 13-14 mm

5ACCCG00.1415-000

Cable grommet 14-15 mm

Optional accessories

Heat pipe

5ACCHP00.0003-000

HMI Heatpipe00 AP5000 VESA

Table 47: 5ACCMA00.0100-000 - Order data

4.2.3.5.3 Technical data

Information:

The following specified characteristic data, features and limit values are only valid for these individual

components and may differ from those of the complete system. The data specified for the complete

system applies to the complete system in which this individual component is used, for example.

Model number

5ACCMA00.0100-000

General information

Certifications

CE

Yes

UL

cULus E115267

Industrial control equipment

Operating conditions

Pollution degree per EN 61131-2

Pollution degree 2

Degree of protection per EN 60529

IP54 

1)

Degree of protection per UL 50

Type 1 

1)

Mechanical properties

Housing

Material

Aluminum, coated

Coating

White aluminum (similar to RAL 9006)

Installation

VESA

Table 48: 5ACCMA00.0100-000 - Technical data

Summary of Contents for Automation Panel 5000

























































































































































































































Reviews:

No comments