B&R 5PC600.SE00-00, User Manual

Page: 379 / 594

Software • B&R Automation Device Interface (ADI) driver - Control Center
Section 4
Soft
w
are
379 Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
10.4.3 Changing UPS battery settings
1) Open the Control Center in the Control Panel .
2) Select UPS tab.
3) Under "Battery settings," click on Edit . Clicking on "Open" opens a dialog box.
4) Select and open the file containing the battery settings.
In this dialog box you can change the settings for the UPS battery.
The changed settings are written to the file by clicking on the OK button. The battery settings for
the UPS can then be updated with this file.
Information:
The current status of the UPS is also displayed when the UPS service is started in
the Windows Control Panel on the UPS page in the energy options.
Information:
In a German version of Windows XP Professional the battery status is displayed as
"low" in the energy options, even if the battery is OK (Windows error). In an English
version, three battery status levels are displayed: unknown, OK, replace A low
battery status is never displayed.
Figure 176: ADI Control Center - UPS battery settings