B&R 5PC600.SE00-00, User Manual

Page: 283 / 594

Software • BIOS options
Section 4
Soft
w
are
283 Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
BIOS setting Meaning Setting options Effect
Onboard AC'97
Audio For turning the AC97 Sound on and off. Enabled Enables AC'97 sound.
Disabled Disables AC'97 sound.
Onboard LAN
(ETH1) For turning the on-board LAN controller
(for ETH1) on and off. Enabled Activates the LAN controller or the ETH1
interface.
Disabled Deactivates the LAN controller or the ETH1
interface.
Serial port 1
configuration For the configuration of serial port 1
(COM1). Disabled Port 1 deactivated.
3F8/IRQ4 Assignment of the base I/O address and the
interrupt.
3E8 / IRQ4 Assignment of the base I/O address and the
interrupt.
Serial port 2
configuration For the configuration of serial port 2
(COM1). Disabled Port 1 deactivated.
2F8/IRQ3 Assignment of the base I/O address and the
interrupt.
2E8 / IRQ3 Assignment of the base I/O address and the
interrupt.
Serial port 2 mode This option is for setting the serial port B
as either a standard interface or as an
infrared interface (not currently
supported). Normal Standard interface.
IrDA IrDA interface (compliant serial infrared port).
ASK IR Interface for IR devices (amplitude shift keyed
infrared port).
Parallel port address The address of the parallel interface can
be defined with this option.
Information:
Address is automatically set, even if
the function is disabled.
Disabled Deactivates the port.
378, 278, 3BC Manual assignment of the port address.
Table 177: X945 Advanced I/O Interface Configuration setting options