B&R 5PC600.SE00-00, User Manual, Page: 347 / 594

Software • Automation PC 620 with Automation Runtime
Section 4
Soft
w
are
347 Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
4. Automation PC 620 with Automation Runtime
4.1 General information
An integral component of Automation Studio™ is Automation Runtime, the software kernel which
allows applications to run on a target system. This runtime environment offers numerous
important advantages:
• Guaranteed highest possible performance for the hardware being used
• Runs on all B&R target systems
• Makes the application hardware-independent
• Applications can be easily ported between B&R target systems
• Cyclic system guarantees deterministic behavior
• Configurable jitter tolerance in all task classes
• Supports all relevant programming language such as IEC 61131-3 and C
• Extensive function library conforming to IEC 61131-3 as well as the expanded B&R
Automation library
• Integrated into Automation NET. Access to all networks and bus systems via function
calls or the Automation Studio™ configuration
4.2 Support for Automation PC 620 embedded
4.2.1 AR010
The fieldbus interfaces CAN, X2X, and POWERLINK are supported by AR010 with an AS 2.6
upgrade.
4.2.2 AR106
The fieldbus interfaces CAN, X2X, and POWERLINK are supported by AR 2.94 together with an
AS 2.7.
4.3 Support for the Automation PC 620 with 5PC600.X945-00 CPU board
4.3.1 AR010
The system is supported by AR010 with an AS 3.0.80 upgrade.
4.3.2 AR106
In preparation.