Software-specific information
Power Panel C50 User's manual V1.10
57
6.4.3 Boot animation
The boot animation must meet the following requirements:
File format
Only file format GIF (Graphics Interchange Format) is permitted for the boot animation.
Size
The size of the boot animation is not permitted to exceed the size of the used display in full screen
mode.
Name
The boot animation can be added with any name in Automation Studio.
Position
When specifying the position of the boot animation (see
"Configuration in Automation Studio" on page
), it is important to make sure that the
entire
boot animation can still be shown on the display.
Application
The boot animation is superimposed over an existing static boot logo.
The boot animation is only displayed when establishing the connection between the terminal and the
HMI application (web application). It is not displayed while the device is booting.
6.5 Temperature monitoring
Automatic overtemperature shutdown
To prevent damage to the device, the inner temperature of the device is monitored continuously by multiple sen-
sors. If the internal temperature of the Power Panel reaches or exceeds the switch-off temperature, an automatic
shutdown occurs (OFF). The device is switched on again (ON) when the temperature drops at least 5°C below
the switch-off temperature.
T
1
T
0
ON
OFF
Temperature monitoring for the automatic shutdown is carried out at two places within the device:
Temperature monitoring
Switch-off temperature T
0
Switch-on temperature T
1
Datapoint
Mainboard
90°C
85°C
TemperatureENV
AR processor
100°C
95°C
TemperatureCPU
The following errors are entered in the logbook in the event of shutdown:
Error number
Short error text
9204
PLC restart triggered by the PLC CPU's temperature monitoring.
9210
Warning: Halt/Service after watchdog or manual reset.
Monitoring by the application
The application can also monitor temperatures and, if necessary, take appropriate corrective measures before an
automatic shutdown occurs.
The following data points are available for this:
Datapoint
Description
TemperatureCPU
Temperature of the AR processor
TemperatureENV
Temperature of the mainboard
TerminalTemperatureCPU
Temperature of the terminal processor
