Accessories
Power Panel C50 User's manual V1.10
61
8.2 0TB6102 2-pin power supply connector
This 1-row 2-pin terminal block is used to connect the power supply.
8.2.1 Order data
Model number
Short description
Terminal blocks
0TB6102.2010-01
Accessory terminal block, 2-pin (3.81), screw clamp terminal block 1.5 mm²
0TB6102.2110-01
Accessory terminal block, 2-pin (3.81), cage clamp terminal block 1.5 mm²
Table 1: 0TB6102.2010-01, 0TB6102.2110-01 - Order data
8.2.2 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
The technical data in this manual is current as of its creation/publication. Subject to change without
notice.
Model number
0TB6102.2010-01
0TB6102.2110-01
Terminal block
Number of pins
2 (female)
Type of terminal block
Screw clamp terminal block variant
Cage clamp terminal block variant
Cable type
Only copper wires (no aluminum wires!)
Pitch
3.81 mm
Connection cross section
AWG wire
28 to 16
Wire end sleeves with plastic covering
0.25 to 0.5 mm²
With wire end sleeves
0.25 to 1.5 mm²
Flexible
0.14 to 1.5 mm²
Inflexible
0.14 to 1.5 mm²
Tightening torque
0.22 to 0.25 Nm
-
Electrical properties
Nominal voltage
300 V
Nominal current
1)
8 A
Table 2: 0TB6102.2010-01, 0TB6102.2110-01 - Technical data
1)
The limit data for each Power Panel must be taken into account.