B&R Industries MASDL3CON-ENG, User Manual

Page: 16 / 58

System overview
16 SDL3 Converter User's manual V 2.00 Translation of the original documentation
3.5.2 Device interfaces
3.5.2.1 Device interface overview
Information:
The interfaces available on the device or module are numbered for the purpose of clear differentiation.
This numbering used by the operating system may deviate, however.
View A
View B
A B
Figure 2: 5COSD4.1000-00 - Device interfaces overview
Legend
1 "SDL/DVI In interface" on page 18 4 "+24 VDC power supply" on page 16
2 "USB In interface" on page 19 5 "Grounding" on page 17
3 "LED status indicators" on page 19 6 "SDL3 Out interface" on page 19
3.5.2.1.1 +24 VDC power supply
Danger!
The device is only permitted to be supplied with a SELV/PELV power supply or with safety extra-low
voltage (SELV) per EN 60950.
The necessary 3-pin connector is not included in delivery; for suitable accessories, see "0TB103.9x" on page 36 .
The device is protected against overload and reverse polarity by a soldered fuse (10 A, fast-acting). If the fuse
is defective (e.g. due to overload), the device must be sent to B&R for repairs. If the polarity is reversed, it is not
necessary to replace the fuse.