Software • BIOS options
Chapter 4 Software
Panel PC 900 User's Manual V1.05
225
1.8 BIOS default settings
BIOS default settings may vary depending on how the complete system is configured.
If the function "Restore defaults" is selected in the main BIOS setup menu, or if "Save & Exit" is selected (or F9 is
pressed) in the individual setup screens, the following BIOS settings are the optimized values that will be used.
1.8.1 Advanced
1.8.1.1 Graphics configuration
Setting/Option
Default profile
My setting
Primary display
Auto
Internal graphics
Auto
IGFX VBIOS version
-
GTT size
2 MB
Aperture size
256 M
DVMT pre-allocated
64 M
DVMT total gfx mem
256 M
Gfx low power mode
Disabled
Graphics performance analyzers
Disabled
Primary IGFX boot display
LFP
Secondary IGFX boot display
CRT
Active LFP configuration
Integrated LVDS
Always try auto panel detect
No
Local flat panel type
Auto
Display Port B interface
Disabled
Display Port C interface
Disabled
Display Port D interface
HDMI/DVI
Display mode persistence
Disabled
Table 196: Advanced - Graphics configuration - Overview of profile settings
1.8.1.2 OEM features
Setting/Option
Default profile
My setting
Main BIOS version
-
OEM BIOS version
-
MTCX
-
ETH2 MAC address
-
Real-time environment
Disabled
Table 197: Advanced - OEM features - Overview of profile settings
1.8.1.2.1 Super I/O configuration
Setting/Option
Default profile
My setting
Serial port A
Enabled
Device settings
-
Serial port B
Enabled
Device settings
-
Serial port C
Enabled
Device settings
-
Serial port D
Disabled
Device settings
-
Serial port E
Enabled
Device settings
-
Serial port F
Enabled
Device settings
-
Table 198: Advanced - OEM features - Super I/O configuration - Overview of profile settings
1.8.1.3 PCI configuration
Setting/Option
Default profile
My setting
Above 4G decoding
Disabled
PCI latency timer
32 PCI bus clocks
VGA palette snoop
Disabled
PERR# generation
Disabled
SERR# generation
Disabled
PIRQ routing & IRQ reservation
Table 199: Advanced - PCI configuration - Overview of profile settings