Software • Windows Embedded Standard 7
244
Panel PC 900 User's Manual V1.05
Function
Windows Embedded Standard 7
Windows Embedded Standard 7 Premium
Windows Explorer shell
✓
✓
Registry filter
✓
✓
Internet Explorer 8.0
✓
✓
Internet Information Service (IIS) 7.0
✓
✓
Anti-malware (Windows Defender)
-
✓
Add-ons (Snipping Tool, Sticky Notes)
-
✓
Windows Firewall
✓
✓
.NET Framework 3.5
✓
✓
32-bit and 64-bit
✓
✓
Remote Desktop Protocol 7.0
✓
✓
File Compression Utility
✓
✓
Windows Installer Service
✓
✓
Windows XP mode
-
-
Media Player 12
✓
✓
DirectX
✓
✓
Multilingual user interface packs in the same image
-
✓
International components and language services
✓
✓
Language pack setup
✓
✓
Windows update
Configurable
Configurable
Windows PowerShell 2.0
✓
✓
BitLocker
-
✓
AppLocker
-
✓
Tablet PC support
-
✓
Windows Touch
-
✓
Boot from USB flash drive
✓
✓
Accessories
✓
✓
Page file
Configurable
Configurable
Number of fonts
134
134
Table 221: Device functions in Windows Embedded Standard 7
4.5 Installation
Upon request, B&R can preinstall Windows Embedded Standard 7 on a suitable CFast card (32-bit: minimum 16
GB, 64-bit: minimum 16 GB). The system is then automatically configured when it is switched on for the first time.
This procedure takes approximately 30 minutes, with the device being rebooted a number of times.
Information:
If the EWF should be used, all mass storage devices should be disconnected from the system during
installation oder SYSPREP (except for the boot drive). It is also possible to disable additional mass
storage devices in BIOS.
4.6 Drivers
All drivers required for operation are preinstalled along with the operating system. If an older version of the
driver is still being used, the latest version can be downloaded and installed from the B&R website (
www.br-
automation.com
). It is important that Enhanced Write Filter (EWF) is disabled for this.
4.6.1 Touch screen driver
A touch screen driver will be installed automatically if a touch controller is detected during the Windows Embedded
Standard 7 installation. If a touch controller is not detected during Windows Embedded Standard 7 installation or a
B&R Automation Panel is connected at a later time, then the touch screen driver needs to be installed manually or
the additional touch screen interface must be selected in the touch screen settings in the Windows Control Panel.
The driver is available in the Downloads section of the B&R website (
www.br-automation.com
). It is important that
both the Enhanced Write Filter (EWF) and the File Based Write Filter (FBWF) are disabled for this.
Information:
Required drivers can only be downloaded from the B&R website, not from manufacturer websites.
