Software • BIOS options
Chapter 4 Software
Panel PC 900 User's Manual V1.05
211
BIOS setting
Function
Configuration options
Effect
Disabled
Disables this function
Smart Response technolo-
gy
Option for enabling/disabling Intel® Smart Re-
sponse technology
Enabled
Enables this function
OROM UI delay
Option for displaying the delay time for the
OROM UI splash screen
2 seconds, 4 seconds,
6 seconds, 8 seconds
Setting in seconds
Table 181: Advanced - SATA configuration - Software feature mask configuration - Configuration options
1)
IRRT = Intel Rapid Recovery technology
1.4.10 Memory configuration
Figure 149: Advanced - Memory configuration
BIOS setting
Function
Configuration options
Effect
Memory information
Displays main memory properties
Enter
Opens the submenu
See "Memory information" on page 212
Default DIMM profile
Uses the default profile
Custom profile
Uses a user-defined profile
XMP Profile 1
Uses XMP profile 1
DIMM profile
Option for configuring the main memory timing
profile
XMP Profile 2
Uses XMP profile 2
Custom profile control
1)
Configuration of the main memory timing profile
Enter
Opens the submenu
See "Custom profile control" on page 213
Auto
Automatic configuration
Memory frequency limiter
2)
Option for setting the maximum possible main
memory frequency
Information:
If a fan kit is not installed in the device,
then the main memory frequency is
limited to 1067 MHz when set to "Au-
to".
1067, 1333, 1600,
1867, 2133, 2400, 2667
Manual configuration
Disabled
Disables this function
No fan memory frequency
limiter
Option for automatically throttling down the main
memory frequency when the system unit has no
fan
Enabled
Enables this function
Disabled
Disables this function
ECC support
Option for enabling/disabling main memory ECC
support
Enabled
Enables this function
Dynamic
Automatically adjusts the TOLUD based on the
MMIO length of the graphics controller
Max TOLUD
3)
Option for configuring the maximum "Top Of
Low Usable DRAM"
1 GB, 1.25 GB, 1.5 GB, 1.75
GB, 2 GB, 2.25 GB, 2.5 GB,
2.75 GB, 3 GB, 3.25 GB
Manual setting of the TOLUD
Auto
Sets automatically
1N mode
Sets 1N mode
NMode support
Option for configuring NMode support
2N mode
Sets 2N mode
Table 182: Advanced - Memory configuration - Configuration options