24
NMLM1000
In
more
detail . . .
The golden rules for care
WARNING!
Always switch the product off, disconnect it from the power supply
and let the product cool down before performing inspection, maintenance and
cleaning work!
1. Keep the product clean. Remove debris from it after each use and before storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of the
product.
3. Inspect the product before each use for worn and damaged parts. Do not operate
it if you find broken and worn parts.
WARNING!
Only perform repairs and maintenance work according to these
instructions! All further works must be performed by a qualified specialist!
General cleaning
1. Clean the product with a dry cloth. Use a brush for areas that are hard to reach.
2. In particular clean the air vents (7) after every use with a cloth and brush.
3. Remove stubborn dust with high pressure air (max. 3 bar).
NOTE:
Do not use chemical, alkaline, abrasive or other aggressive detergents
or disinfectants to clean this product as they might be harmful to its surfaces.
4. Check for any damage and wear. Repair damages in accordance with this instruction
manual or take it to an authorised service centre before using the product again.
Spare parts/Replacement parts
The following parts of this product may be replaced by the consumer. Spare parts are
available at an authorized dealer or through our customer service.
Description
Model no. or Specification
Cutting device (blade)
GD65BX.00.03
Care and maintenance
