Bandit
22
Copyright 3/17
MODEL SA-25
Use as a reference only, locations may vary depending on options or component manufacturer.
Lubrication point instructions are described on the machine, in the Lubrication & Coolant
Section and Maintenance Section of this manual, or component manufacturer’s manual.
NOTICE
MAINTENANCE
LUBRICATION CHART
A right angle grease fitting may need to be used to grease some of the lubrication
points. This type of grease fitting can be obtained from most local automotive
parts stores.
CHECK
# DESCRIPTION
DAY WEEK MONTH PROCEDURE
1 Swing Pivot Bushings
X
1 - 2 shots of grease. Wipe off excess.
2 Cylinder Lug Bushings
X
1 - 2 shots of grease. Wipe off excess.
3 Steel Friction Areas: pivoting,
X
Lubricate (i.e. cutter wheel guard)
hinged, sliding, rolling
1
2
2
2
2
3
